Skip to main content
All CollectionsDrawing Tools
Adding Doors and Windows - Using Openings
Adding Doors and Windows - Using Openings
Updated over a week ago

The Openings tool

Use the Openings tool to place doors and windows in your drawings.

Access and Use

  1. Tap on the Openings icon (5th icon) on the toolbar

  2. Tap a door or window from the Doors & Windows pane

  3. Drag object to snap to wall

  4. When dropped on a wall, it will break the wall segment into multiple pieces

openings.png

Adjust

Once a door or window has been added to the wall, you can adjust in multiple ways.

  1. Resize door by tapping on dimension displayed

  2. Drag door along wall segment

  3. Tap and change relative dimensions shown (shown in green)

Change Door and Window Orientation

You can change the door opening direction / orientation with the Flip icon that appears above any selected smart door/window

  1. Select opening on screen

  2. Press and hold the Flip icon about the selected opening

  3. Drag to choose orientation

flip.png
Did this answer your question?