While the Fence Builder takes all of the information you provide to create the Assemblies, you will need to define what objects will be included.
The Configure Assemblies screen shows all of the Assemblies that have been created thus far. You will need to open each one and define members and quantities.
Configure an Assembly
Select an assembly from the list to see its suggested objects and quantities.
From the previous Assemblies list screen, I have clicked on the 4'H End Post assembly link.
Shown below are the typical items found in this Assembly and a suggested quantity needed for the Post.
I select the Concrete entry on the previous screen and am presented with whatever Products are relevant to choose from. In this case, there is only one Concrete Product I can add.
You can see that the Concrete options has now been defined and you have two additional options.
The suggested quantity of 1 bag of Concrete is predefined. However you can change that as well. In the case where you use 1 1/2 bags of concrete per post, you can change the number to 1.5
You can also choose if this Product is Required ( should always be added ) or if it is an Optional Product that you may or may not want to add.
The next option "Terminal cap - Galv" is suggesting that you use a Product Group. If you have created one previously, you can now select if from the list.
If instead you want to add a single product, you can choose from the Select other items link at the bottom of the screen.
You do not have to define all of the suggestions Assembly items. Any Items that you do not define will simply not be included in the final Assembly.