All Collections
Using Bluetooth Measurement Devices
Using Bluetooth Measurement Devices
Updated over a week ago


Using a Bluetooth Measurement Tool is a great way to accurately and easily add measurements to ArcSite drawings. Using a supported device, you can capture a measurement and automatically add that measurement to a line in ArcSite.

Connect to Your Laser Device

You can connect to your Bluetooth Measurement tool from Settings or from the Number pad itself. The following video shows the connection option within Settings.

Transfer Measurements

You can send the measurement from the measurement device as follows.

  1. Tap to make a drawn line or wall segment the active object

  2. Tap on the displayed measurement

  3. In the number pad, ensure the Bluetooth device is connected

  4. Connect if necessary

  5. From the Bluetooth device, push the button to transfer the measurement over

Certified Leica devices for all versions of ArcSite (iOS, Android, and Windows)

The following Leica devices have been certified to work with all versions of ArcSite.

  1. DISTO D510

  2. DISTO D810 Touch

  3. DISTO D110

  4. DISTO D2

  5. DISTO D1

Certified Bosch devices for iOS Version of ArcSite

The following Bosch devices have been certified to work with the iOS version of ArcSite.

  1. GLM 50 C

  2. GLM 100 C

  3. GLM 120 C

  4. GLM 150 C

  5. GLM400C

  6. GLM 50-27 C / CG Professional

  7. GLM165-27C / CG Professional

  8. GLM 120 C Professional (JP version)

  9. PLR 30 C

  10. PLR 40 C

  11. PLR 50 C

Subscription Level Required

Core or above subscription

Troubleshoot Issues

If encountering issues with the Bluetooth connection, see this article - Why won't my laser measure connect?

Did this answer your question?